Cisco TelePresence 7010 Help Manual page 69

Conferences
Table 35: Status (continued)
Field Field description
Content Whether the content channel is currently in
use.
Enter/Leave Allows you to force the conference's layout
OneTable into or out of OneTable mode.
mode
Table 36: All participants
Field Field description
Endpoint The names of the endpoints currently
participating in the active conference.
Type The endpoint type.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
One of:
Disabled: content sharing is disabled for the
n
conference. To enable content for this
conference, go to Conferences >
conference name > Configuration
No current presentation: content sharing is
n
enabled for the conference but there is no
active contributor
Presentation from <endpoint display name>:
n
there is an active contributor of content
For more information, see
support.
This option displays if there are three or four
multi-screen endpoints in the conference
supporting OneTable mode. It displays (with
different options) for both values of Use
OneTable mode when appropriate.
Not all multi-screen endpoints support
OneTable mode. See the endpoint
interoperability reference for a list of
supporting endpoints.
Usage tips
If the conference is not active, this section
shows No endpoints.
To remove a participant from the conference:
select the appropriate check box and select
Disconnect selected
Click on the endpoint's name to go to its
Status page.
Content channel
Page 69 of 132