Cisco TelePresence 7010 Help Manual page 89

Endpoints and endpoint groups
Table 46: Display parameters (continued)
Field Field description
Show If you select this option, the Cisco TelePresence
endpoint Server will label view panes in the conference layout
names as sent to this endpoint or endpoint group with the
panel names of the participants shown in those panes.
labels
Self view If this option is not selected, the Cisco TelePresence
Server will never show the video stream sent from
this endpoint or endpoint group to the participants
using this endpoint or endpoint group i.e. they will
not see themselves.
Default This option controls the default layout single-screen
layout type endpoints see when they connect.
for single-
Select a setting from the drop-down list to be used as
screen
the default:
endpoints
Single: Endpoints will be shown in one full screen
n
pane.
ActivePresence: Endpoints will be shown in one
n
full screen pane with additional participants
appearing in up to nine equally sized overlaid
panes at the bottom of the screen.
Prominent: Endpoints will be shown in one large
n
pane with additional participants appearing in up
to four equally sized panes at the bottom of the
screen.
Equal: Endpoints will be shown in a grid pattern of
n
equally sized panes on the screen, up to 4x4.
Default This option controls the default layout multi-screen
layout type endpoints see when they connect.
for multi-
Select a setting from the drop-down list to be used as
screen
the default:
endpoints
Single (Full screen): Endpoints will be shown in
n
full screen panes. A single participant displays per
screen.
ActivePresence: Endpoints will always be shown
n
in full screen panes with additional participants
appearing in up to six equally sized overlaid
panes at the bottom of each screen (up to four
panes for 2 and 4 screen endpoints).
Table 47: Content parameters
Field Field description
Content Whether this endpoint or endpoint group is
Video permitted to contribute content to the
contribution conference via content channel.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
Disabled by default.
For more information, see
how participants display in layout
The default setting is ActivePresence.
Participants can change their layout using
Far End Camera Control, DTMF keys 2
and 8, or ActiveControl if supported in the
deployment.
Note: multiscreen endpoints without
loudest pane information will be
composed into a single pane in the main
pane, or replaced with the grouped
endpoint placeholder in the pip strip.
See the endpoint interoperability reference
for a list of the multi-screen systems that
reveal the loudest panel information.
Participants can change their layout using
Far End Camera Control or via DTMF keys
2 and 8, or ActiveControl if supported in
the deployment.
The default is ActivePresence.
Usage tips
To use the content channel, the content channel
must be enabled for the conference in its
configuration page.
Understanding
views.
Page 89 of 132