Cisco TelePresence 7010 Help Manual page 92

Endpoints and endpoint groups
Table 48: Video settings (continued)
Field Field description
Motion / This setting controls the preference for
sharpness which resolutions the TelePresence
trade off Server will transmit to the endpoint for
motion (frames per second) and
sharpness (frame size or resolution).
The setting controls how the
TelePresence Server will determine
its preference of the settings to be
used.
Select a setting from the drop-down
list to be used:
Favor motion: the TelePresence
n
Server will try and use a high frame
rate. That is, the TelePresence
Server will strongly favor a
resolution of at least 25 frames per
second
Balanced: the TelePresence Server
n
will select settings that balance
resolution and frame rate (where
the frame rate will not be less than
12 frames per second)
Favor sharpness: the TelePresence
n
Server will use the highest
resolution that is appropriate for
what is being viewed
Table 49: Network settings
Field Field description
Default The maximum network capacity used by the
bandwidth media channels established by the
(both to TelePresence Server to and from this
and from endpoint or endpoint group.
the
endpoint)
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
Usage tips
When the TelePresence Server makes a call to an
endpoint, it chooses the maximum bandwidth that
is allowed to be used for the media channels which
comprise that call. This field sets that maximum
bandwidth, and is the total bandwidth of the audio,
video, and content channels combined.
The bandwidth available may also be limited by
the configuration of the endpoint or other devices
through which the call passes.
This setting overwrites (for this endpoint) the
Default bandwidth (both to and from the server)
setting made for all endpoints on the
> Default endpoint settings
Configuration
page.
Page 92 of 132