Powering Down - Christie M-Series User Manual

Section 2: Installation and Setup

2.2.8 Powering Down

The projector can be powered down by using one of the following methods:
Remote Keypad/Built-In Keypad
1. Press and hold P
2. Press P
OWER
3. Press P
OWER
not pressed immediately, a confirmation window will appear. The second key press must be pressed within
1 second of the window appearing.
NOTE: After powering down, the Status LEDs cycle and the LCD displays the message "Cooling Down",
until cool down is complete.
WEB USER INTERFACE (UI)
1. From the Main Tab, Select Power>OFF. NOTE:
A window will display for confirmation on
powering down, see
2. Select Yes.
2-20
F 2-17 - P
IGURE
or
OWER
twice,
once, then immediately press the DOWN key. NOTE: For Step 2 and 3, if the second key is
Figure 2-18.
S F
OSITION ETSCREW LUSH
F 2-18 - P
IGURE
D /W U
OWERING OWN EB SER
M-Series User Manual
020-100009-02 Rev. 1 (04-2009)
I -
NTER