Powering Down - Christie M Series User Manual

2.2.8 Powering Down

The projector can be powered down by using one of the following methods:
Remote Keypad/Built-In Keypad
• Press and hold P
OR
• Press P
OWER
OR
• Press P
OWER
pressed immediately, a confirmation window will appear. The second key press must be pressed within 1
second of the window appearing.
After powering down, the Status LEDs cycle and the LCD displays the message "Cooling Down", until
NOTE:
cool down is complete.
Web User Interface (UI)
1. From the Main Tab, Select Power>OFF.
window will display for confirmation on powering
down, see Figure
2. Select Yes.
M Series User Manual
020-100009-04 Rev. 1 (10-2009)
F 2-17 P
IGURE
OWER
twice
once, then immediately press the DOWN key.
2-18.
S F
OSITION ETSCREW LUSH
NOTE:
A
NOTE:
F 2-18 P
IGURE
Section 2: Installation and Setup
For Step 2 and 3, if the second key is not
D /W
OWERING OWN EB
U I -
SER NTER
2-19