Christie M-Series User Manual page 54

Section 3: Operation
The channel setup icons list all defined channels. The far left column lists channel numbers defined. The values
in the far right columns indicate horizontal and vertical frequencies or if there is a defined name for a channel,
it appears here. The H & V frequencies will not appear if a name has been defined for the channel; instead the
name is only seen. The H & V frequencies are inserted as, the name when the channel is first created. The
vertical frequency is displayed with the sync polarity. The remaining columns pertain to each signal type; such
as, input number, slot location, a variety of icons indicating access to each channel, and an abbreviated
description of each signal type. NOTE: Use U
channels not visible in the initial display of channels.
SIGNAL TYPE — The channel list or the Channel Setup menu, identifies signal types abbreviations as
defined below in
wire). These abbreviations are preceded by either an 'i' (interlaced signals) or 'p' (progressive signal).
Table 3.2 - Abbreviations for Signal Type
The first 5 items in this table is analog RGB with various sync combinations indicating Sync Source when
editing the channel:
TO COPY A CHANNEL, highlight the desired channel in the Channel Setup menu, then press E
to the Select Channel Operation submenu. Select "Copy" and press E
is identical to original, which still remains, but it is identified with the next available number from 01-99. If
you change your mind and do not want to copy the current channel, press E
previous menu. Copying channels is a quick method for creating numerous channels, each of which can then
be edited and adjusted for a variety of presentations in the future.
3-14
F 3-13 - C
IGURE
Table 3.2 - Abbreviations for Signal
Abbrev.
--
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
DSDI
DVI
HDMI
HSDI
SDI
S M
HANNEL ETUP ENU
and D
A K
P RROW EY OWN
Type. Composite Sync on the H/C input or the V input (4-
Signal Type
No Sync
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green (4 wire)
Separate H,V (5-wire)
Separate H,V swapped (5-wire)
S-Video
Composite Video
Digital
Digital Dual Link HD-SDI
Digital DVI
Digital HDMI
Digital HD-SDI
Digital SDI
to see the remaining
A K
RROW EY
—a new channel will be created. It
NTER
to cancel and return to the
XIT
M-Series User Manual
020-100009-02 Rev. 1 (04-2009)
to go
NTER