Page 1
Portrait Adapter Instruction Sheet INTRODUCTION This document describes user instructions for the M Series Portrait Adapter (#118-116109-XX). Figure 1 Portrait Adapter Do not use the Portrait Adapter if the mirror is cracked or broken. Do not look directly into the light from the mirror while projector is switched...
Page 2
Figure 2 Image Displayed as Portrait The applicable projection lenses and specifications in portrait mode are given below. Mirage S+/HD/WU Matrix S+HD/WU M Series Models Horizontal Vertical Lens Throw Ratio Christie HD/DS+/WU, DLV Lens Part Number...
Page 3
INSTRUCTIONS To prepare for Portrait Adapter installation: Always attach the Portrait Adapter Safety Cable for all installations. Figure 3 Secure Safety Cable with Carabiner Clip 1. Remove the protective film from the surface of the mirror. To attach the Portrait Adapter: 2.
Page 4
3. Move the Portrait Adapter onto the end of the projection lens (see Figure Figure 5 - Mounting the Portrait Adapter Make sure the collar touches the end of the projection lens, see Figure 6 for correct installation, and Figure 7 for incorrect installation.
Page 5
Adapter. 6. Focus, zoom and offset the lens as necessary. NOTE: For some applications, it may be necessary to boresight the lens mount with the Portrait Adapter installed, refer to the M Series User Manual for details.