Table of Contents
Advertisement
Section 2: Installation and Setup
2.2.4 Powering Down
The projector can be powered down by using one of
the following methods:
Remote Keypad/Built-In Keypad
• Press and hold P
OR
• Press P
OWER
OR
• Press P
OWER
DOWN key.
NOTE:
second key is not pressed immediately, a
confirmation window will appear. The second key
press must be pressed within 1 second of the window appearing.
NOTE:
After powering down, the Status LEDs cycle and the LCD displays the message "Cooling Down", until
cool down is complete.
Web User Interface (UI)
1. From the Main Tab, Select Power>OFF.
down, see
Figure
2. Select Yes.
2-8
OWER
twice
once, then immediately press the
For Step 2 and 3, if the
2-10.
F
2-9
IGURE
F
2-10 P
IGURE
NOTE:
A window will display for confirmation on powering
D
/W
U
OWERING
OWN
EB
SER
J Series 1000W & 1200W Setup Guide
020-100740-02 Rev. 1 (03-2014)
I
NTERFACE
Advertisement
Table of Contents
