Powering Down - Christie J Series 2.0 kW Setup Manual

2.2.4 Powering Down

The projector can be powered down by using one of
the following methods:
Remote Keypad/Built-In Keypad
• Press and hold P
-OR-
• Press P
OWER
-OR-
• Press P
OWER
NOTES: 1) For Step 2 and 3, if the second key is not pressed immediately, a confirmation window will appear.
The second key press must be pressed within 1 second of the window appearing. 2) After powering down, the
Status LEDs cycle and the LCD displays the message "Cooling Down", until cool down is complete.
Web User Interface (UI)
1. From the Main Tab, Select Power > OFF.
NOTE: A window will display for confirmation on powering down.
2. Select Yes.
J Series 2.0, 2.4, and 3.0 kW Setup Guide
020-100751-03 Rev. 1 (02-2014)
OWER
twice
once, then press the D
OWN
key.
Section 2: Installation and Setup
2-9