Christie M-Series User Manual page 49

OR
• Press M to leave the menu system and return to the presentation.
ENU
NOTES: 1) If there is no signal present, all source-dependent adjustments are disabled. 2) After 15 minutes
of inactivity, the projector leaves the menu system and returns to the presentation. 3) The Status menu is
read-only.
On-line Help
Press H to display summary information about the current menu or highlighted option. Press H
ELP
exit.
1. Size and Position
2. Image Settings
3. Channel Setup
4. Configuration
5. Lamp
6. Status
7. Input Switching & PIP
8. Test Pattern
9. Language
The Global Icon
Menu options that include this icon apply universally. Menu options without this icon apply to the
selected channel only.
Using Slide bars and Other Controls
Most of the function menus allow you to change settings by using slide bars, checkboxes, and pull-down lists.
Navigating options:
• Enter the menu option number corresponding to the setting you wish to change (for example, press M
3 to select "Vertical Stretch" in the Size and Position menu).
• Move the highlight to the option desired and press E
• Move the highlight to the option desired and press L
• You can bypass the menus entirely and use a single key to immediately access an adjustment during your
presentation (applies only to options having their own key, such as Contrast, Brightness, Gamma, etc.).
• For "blind" access, hide the entire menu system (see OSD key, above) and access using the proper sequence
of key presses.
Slide bars in menus – The current value for a given parameter, such as size or
vertical stretch, appears to the left of its slide bar icon (adjustment window). This
number often expresses a percentage, or it may have units associated with it (such
as pixels), depending on the specific option. Press L
gradually adjust the setting up or down—both the number and the length of the
bar change accordingly. Hold for continuous adjustment. Or press E
specific number entry via the keypad and then press E
M-Series User Manual
020-100009-02 Rev. 1 (04-2009)
Main Menu
Help
Off
English
Use this menu to adjust settings affecting current image
size and position, such as horizontal and vertical
placement, blanking, resizing, and others.
F 3-5 - O -L H
IGURE N INE ELP
.
NTER
/R A
EFT IGHT RROW
/R A
EFT IGHT RROW
NTER
to save (or press E
NTER
Section 3: Operation
Help
to adjust immediately.
K
EY
F 3-6 -
IGURE
to
K
EY
S
LIDE
to activate a slide bar text box for
to cancel).
XIT
again to
ELP
1
ENU
E
XAMPLE OF
B
AR
3-9