Web: Viewing And Configuring Stacking - HP Procurve 2650 Management And Configuration Manual

Figure 14-38. Example of the Web Browser Interface for a Commander
Stacking uses only the primary VLAN on each switch in a stack.
I
The primary VLAN can be tagged or untagged as needed in the
I
stacking path from switch to switch.
I The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.

Web: Viewing and Configuring Stacking

The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
Switches 2650 and 6108.
To view or configure stacking on the web browser interface:
Click on the Configuration tab.
1.
2. Click on to display the stacking configuration for an individual
switch, and make any configuration changes you want for that switch.
3. Click on
switch.
4. If the switch is a Commander, use the
buttons for viewing and using stack features.
To access the web-based Help provided for the switch, click on
browser screen.
to save any configuration changes for the individual
HP Procurve Stack Management
Configuring Stack Management
and
in the web
14-45