HP Procurve 2650 Management And Configuration Manual page 166

Time Protocols
TimeP: Viewing, Selecting, and Configuring
8-20
If you then viewed the TimeP configuration, you would see the following:
Figure 8-14. Example of TimeP with Time Sychronization Disabled
Disabling the TimeP Mode. Disabling the TimeP mode means to configure
it as disabled. (Disabling TimeP prevents the switch from using it as the time
synchronization protocol, even if it is the selected
Syntax: no ip timep
For example, if the switch is running TimeP in DHCP mode,
the TimeP configuration as shown below, and disables time synchronization
on the switch.
Figure 8-15. Example of Disabling Time Synchronization by Disabling the TimedP
Mode Parameter
Disables TimeP by changing the TimeP mode
configuration to
Disabled
Even though the Time Sync Mode is set to Timep,
time synchronization is disabled because no ip
timep has disabled the TimeP Mode parameter.
option.)
Time Sync Method
.
changes
no ip timep