HP Procurve 2650 Management And Configuration Manual page 281

3. Use the arrow keys to select the port you want, and the Space bar to select
Unknown VLAN option for any ports you want to change.
4. When you finish making configuration changes, press
Save) to save your changes to the Startup-Config file.
CLI: Viewing and Configuring GVRP
GVRP Commands Used in This Section
show gvrp below
gvrp page 11-44
unknown-vlans page 11-44
Displaying the Switch's Current GVRP Configuration. This command
shows whether GVRP is disabled, along with the current settings for the
maximum number of VLANs and the current Primary VLAN. (For more on the
last two parameters, see "Port-Based Virtual LANs (Static VLANs)" on page
11-3.)
Syntax: show gvrp
Figure 11-29. Example of "Show GVRP" Listing with GVRP Disabled
Figure 11-30. Example of Show GVRP Listing with GVRP Enabled
Port-Based Virtual LANs (VLANs) and GVRP
Shows the current settings.
This example includes
non-default settings for
the Unknown VLAN field
for some ports.
GVRP
, then (for
11-43