Starting An Hp Web Browser Interface Session With The Switch; Using A Standalone Web Browser In A Pc Or Unix Workstation - HP Procurve 2650 Management And Configuration Manual

Using the HP Web Browser Interface

Starting an HP Web Browser Interface Session with the Switch

N o t e :
4-4
Starting an HP Web Browser Interface
Session with the Switch
You can start a web browser session in the following ways:
I Using a standalone web browser on a network connection from a PC or
UNIX workstation:
• Directly connected to your network
• Connected through remote access to your network
I Using a management station running HP TopTools for Hubs & Switches
on your network
Using a Standalone Web Browser in a PC or UNIX
Workstation
This procedure assumes that you have a supported web browser installed on
your PC or workstation, and that an IP address has been configured on the
switch. (For more on assigning an IP address, refer to "IP Configuration" on
page 7-3.)
1. Make sure the Java
not, use the options menu in your browser to do the following:
In Netscape, enable the Java and JavaScript options.
•
• In Microsoft Internet Explorer, enable the Java Permissions.
Refer to your selected browser's online Help for specific information on
enabling the Java applets.
The authorized IP managers list can be used to limit access to the Web
interface to only select IP addresses. For more on this feature see the Access
Security Guide chapter "Using Authorized IP Managers"
TM
applets are enabled for your browser. If they are