HP Procurve 2650 Management And Configuration Manual page 214

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Default
Community and
Settings
Non-Default
Community and
Settings
Trap Receiver
Data (See page
10-8.)
Figure 10-3. Example of the SNMP Community Listing with Two Communities
10-6
CLI: Viewing and Configuring Community Names
Community Name Commands
show snmp-server [<community-string>]
[no] snmp-server
[community <community-str>]
[host <community-str> <ip-addr>]
[<none | debug | all | not-info | critical>]
[enable traps <authentication>
Listing Community Names and Values. This command lists the data for
currently configured SNMP community names (along with trap receivers and
the setting for authentication traps — see "Trap Receivers and Authentication
Traps" on page 10-8).
show snmp-server [<community-string>]
Syntax:
This example lists the data for all communities in a switch; that is, both the
default HPswitch "public" community name and another community named
"blue-team"
To list the data for only one community, such as the "public" community, use
the above command with the community name included. For example:
Page
10-6
10-7
10-7
10-10
10-11