Web: Viewing And Configuring Stacking - HP ProCurve series 2500 Management And Configuration Manual

Configuring Advanced Features
HP ProCurve Stack Management
I
I
I

Web: Viewing and Configuring Stacking

Figure 9-38. Example of the Web Browser Interface for a Commander
The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
Series 2500 switch.
To view or configure stacking on the web browser interface:
1.
2.
9-48
Stacking uses only the primary VLAN on each switch in a stack.
The primary VLAN can be tagged or untagged as needed in the
stacking path from switch to switch.
The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.
Click on the Configuration tab.
Click on [Stacking] to display the stackingconfiguration for an individual
switch, and make any configuration changes you want for that switch.