VLAN Information
The switch uses the CLI to display the following VLAN status:
Show Command
show vlan
show vlan <vlan-id>
For example, suppose that your switch has the following VLANs:
Ports
VLAN
1 - 12
DEFAULT_VLAN
1, 2
VLAN-33
3, 4
VLAN-44
The next three figures show how you could list data on the above VLANs.
Listing the VLAN ID (VID) and Status for ALL VLANs in the Switch.
Monitoring and Analyzing Switch Operation
Output
Lists:
• Maximum number of VLANs to support
• Existing VLANs
• Status (static or dynamic)
• Primary VLAN
For the specified VLAN, lists:
• Name, VID, and status (static/dynamic)
• Per-Port mode (tagged, untagged, forbid, no/auto)
• "Unknown VLAN" setting (Learn, Block, Disable)
• Port status (up/down)
VID
1
33
44
Status and Counters Data
B-19