Viewing The Switch's Current Cdp Configuration; Viewing The Switch's Current Cdp Neighbors Table - HP Procurve 2650 Management And Configuration Manual

Configuring for Network Management Applications
CDP
Figure 10-9. Example of Show CDP with the Default CDP Configuration
10-20

Viewing the Switch's Current CDP Configuration

Syntax: show cdp
Lists the switch's global and per-port CDP configura-
tion.
This example shows the default CDP configuration.

Viewing the Switch's Current CDP Neighbors Table

Devices are listed by the port on which they were detected.
Syntax: show cdp neighbors
Lists the neighboring CDP devices the switch detects,
with a subset of the information collected from the
device's CDP packet. (For more on this topic, refer to
table 10-2, "CDP Neighbors Data" on page 10-27.)
[detail]
Provides a longer list of details on all of the CDP-aware
device the switch detects.
[[e] port-numb]
(For more on this topic, see "CDP Neighbor Data and MIB Objects" on page
10-26.)
CDP Enable/Disable on the Switch
Packet Hold Time in CDP Neighbor Table
Interval for Transmitting Outbound
CDP Packets on All Ports
Per-Port CDP Enable/Disable
Lists the details for the CDP-aware device con-
nected to the specified port. (Allows only one port
at a time.)