HP Procurve 2650 Management And Configuration Manual page 459

Figure B-19. How To Select a Monitoring Port
5. Use the Space bar to select the port to use for monitoring.
6. Use the down arrow key to move the cursor to the Action column for the
individual ports and position the cursor at a port you want to monitor.
Press the Space bar to select Monitor for each port and trunk that you want
7.
monitored. (Use the down arrow key to move from one interface to the
next in the Action column.)
8. When you finish selecting ports to monitor, press
Save) to save your changes and exit from the screen.
9. Return to the Main Menu.
Monitoring and Analyzing Switch Operation
Port and Static Trunk Monitoring Features
Move the cursor to the Monitoring Port parameter.
Inbound Port and Trunk Monitoring (Only) on the Switch 4108
, then press (for
B-25