HP Procurve 2650 Management And Configuration Manual page 40

Using the Menu Interface
Main Menu Features
2-8
Command Line (CLI): Selects the Command Line Interface at the same
I
level (Manager or Operator) that you are accessing in the Menu interface.
(See chapter 3, "Using the Command Line Interface (CLI)".)
I Reboot Switch: Performs a "warm" reboot of the switch, which clears
most temporary error conditions, resets the network activity counters to
zero, and resets the system up-time to zero. A reboot is required to activate
a change in the VLAN Support parameter. (See "Rebooting from the Menu
Interface" on page 5-10.)
Download OS: Enables you to download a new software version to the
I
switch. (See Appendix A, "File Transfers".)
I Run Setup: Displays the Switch Setup screen for quickly configuring
basic switch parameters such as IP addressing, default gateway, logon
default interface, spanning tree, and others. (See the Installation and
Getting Started guide shipped with your switch.)
Stacking: Enables you to use a single IP address and standard network
I
cabling to manage a group of up to 16 switches in the same subnet
(broadcast domain). See Chapter 14, "HP Procurve Stack Management".
Logout: Closes the Menu interface and console session, and disconnects
I
Telnet access to the switch. (See "How to End a Menu Session and Exit
from the Console" on page 2-5.)