Web: Implementing Configuration Changes - HP Procurve 2650 Management And Configuration Manual

Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.
Reminder to
reboot the switch
to activate
configuration
changes.
N o t e
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
(To access these parameters, go to the Main menu and select 2. Switch
Configuration, then 8. VLAN Menu, then
If configuration changes requiring a reboot have been made, the switch
displays an asterisk (*) next to the menu item in which the change has been
made. For example, if you change and save parameter values for the
parameter, an asterisk appears next to the
VLANs to support
the VLAN Menu screen, and also next to the
Main menu, as shown in figure 4-6:
Figure 5-6. Indication of a Configuration Change Requiring a Reboot

Web: Implementing Configuration Changes

You can use the web browser interface to simultaneously save and implement
a subset of switch configuration changes without having to reboot the switch.
That is, when you save a configuration change (in most cases, by clicking on
or
config file and the startup-config file.
If you reconfigure a parameter in the CLI and then go to the browser interface
without executing a write memory command, those changes will be saved to
the startup-config file if you click on
browser interface.
Switch Memory and Configuration
1. VLAN Support
Switch Configuration . . .
, you simultaneously change both the running-
.)
Maximum
entry in
VLAN Support
entry in the
or in the web
5-11