HP Procurve 2650 Management And Configuration Manual page 490

Troubleshooting
Diagnostic Tools
Basic Ping
Operation
Ping with
Repetitions
Ping with
Repetitions
and Timeout
Ping Failure
Figure C-8. Examples of Ping Tests
C-28
is the number of seconds to allow per attempt to test a
Timeout in Seconds
connection before determining that the current attempt has failed.
To halt a Link or Ping test before it concludes, click on the Stop button.
To reset the screen to its default settings, click on the Defaults button.
CLI: Ping or Link Tests
Ping Tests. You can issue single or multiple ping tests with varying repeti-
tions and timeout periods. The defaults and ranges are:
Repetitions: 1 (1 - 999)
I
I Timeout: 5 seconds (1 - 256 seconds)
Syntax: ping <ip-address> [repetitions <1 - 999>] [timeout <1 - 256>]
To halt a ping test before it concludes, press .