HP Procurve 2650 Management And Configuration Manual page 145

Hide thumbs Also See for Procurve 2650:
Table of Contents

Advertisement

Figure 7-7. Configuration File in TFTP Server, with Dedicated IP Addressing Instead of DHCP/Bootp
IP Preserve: Retaining VLAN-1 IP Addressing Across Configuration File Downloads
To summarize the IP Preserve effect on IP addressing:
If the switch received its most recent VLAN 1 IP addressing from a DHCP/
I
Bootp server, it ignores the IP Preserve command when it downloads the
configuration file, and implements whatever IP addressing instructions
are in the configuration file.
I
If the switch did not receive its most recent VLAN 1 IP addressing from a
DHCP/Bootp server, it retains its current IP addressing when it downloads
the configuration file.
The content of the downloaded configuration file determines the IP
I
addresses and subnet masks for other VLANs.
Configuring IP Addressing
Because switch 4 (figure 7-5) received
its most recent IP addressing from a
DHCP/Bootp server, the switch
ignores the ip preserve command and
implements the IP addressing
included in this file.
7-17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6108

Table of Contents