HP Procurve 2650 Management And Configuration Manual page 128

Interface Access, System Information, and Friendly Port Names
Using Friendly (Optional) Port Names
Figure 6-14. Example Listing of the Startup-Config File with a Friendly Port Name Configured (and Saved)
6-20
For a given port, if a friendly port name does not exist in the running-config
file, the line in the above command output appears as:
To Search the Configuration for Ports with Friendly Port Names.
This option tells you which friendly port names have been saved to the startup-
config file. (show config does not include ports that have only default settings
in the startup-config file.)
show config
Syntax:
For example, if you configure port A1 with a friendly port name:
includes friendly port names in a listing of all
interfaces (ports) configured with non-default
settings. Excludes ports that have neither
a friendly port name nor any other non-default
configuration settings.
Listing includes friendly
port name for port A1
only.
This command sequence
saves the friendly port name
for port A1 in the startup-
config file, but does not do so
for the name entered for port
A2.
In this case, show config lists
only port A1. Executing write
mem after entering the name
for port A2, and then executing
show config again would
result in a listing that includes