Web: Viewing And Configuring Stacking - HP procurve series 4100gl Management And Configuration Manual

Figure 14-38. Example of the Web Browser Interface for a Commander
Stacking uses only the primary VLAN on each switch in a stack.
I
I The primary VLAN can be tagged or untagged as needed in the
stacking path from switch to switch.
I The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.

Web: Viewing and Configuring Stacking

The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
Series 4100GL switches.
To view or configure stacking on the web browser interface:
Click on the Configuration tab.
1.
2. Click on to display the stackingconfiguration for an individual
[Stacking]
switch, and make any configuration changes you want for that switch.
3. Click on
[Apply Changes]
switch.
4. If the switch is a Commander, use the
buttons for viewing and using stack features.
To access the web-based Help provided for the switch, click on
browser screen.
to save any configuration changes for the individual
[Stack Closeup]
HP Procurve Stack Management
Configuring Stack Management
and
[Stack Management]
[?]
in the web
14-45