HP Procurve 2650 Management And Configuration Manual page 363

Table 14-4.Candidate Configuration Options in the Menu Interface
Parameter Default Setting
Stack State Candidate
Auto Join Yes
Transmission Interval 60 Seconds
Using the Menu To Manage a Candidate Switch
Using the menu interface, you can perform these actions on a Candidate
switch:
I Add ("push") the Candidate into an existing stack
I Modify the Candidate's stacking configuration (
Interval )
Convert the Candidate to a Commander
I
I Disable stacking on the Candidate so that it operates as a standalone
switch
In its default stacking configuration, a Candidate switch can either automati-
cally join a stack or be manually added ("pulled") into a stack by a Commander,
depending on the Commander's
Candidate's configuration options:
Using the Menu To "Push" a Switch Into a Stack, Modify the Switch's
Configuration, or Disable Stacking on the Switch. Use Telnet or the
web browser interface to access the Candidate if it has an IP address. Other-
wise, use a direct connection from a terminal device to the switch's console
port. (For information on how to use the web browser interface, see the online
Help provided for the browser.)
1. Display the Stacking Menu by selecting
2. Display the Stack Configuration menu by pressing
.
Configuration
setting. The following table lists the
Auto Grab
Other Settings
Commander, Member, or Disabled
No
Range: 1 to 300 seconds
Stacking
HP Procurve Stack Management
Configuring Stack Management
Auto Join and Transmission
in the console Main Menu.
to select
Stack
14-15