HP Procurve 2650 Management And Configuration Manual page 362

HP Procurve Stack Management
Configuring Stack Management
14-14
4. Move the cursor to the Stack State field by pressing
use the Space bar to select the
5. Press the down arrow key to display the Commander configuration fields
in the Stack Configuration screen.
Figure 14-7. The Default Commander Configuration in the Stack Configuration
Screen
6. Enter a unique stack name (up to 15 characters; no spaces) and press the
down arrow key.
7. Ensure that the Commander has the desired
the down arrow key:
No (the default) prevents automatic joining of Candidates that
•
have their
Auto Join
Yes enables the Commander to automatically take a Candidate
•
into the stack as a Member if the Candidate has
the default Candidate setting) and does not have a previously
(
configured password.
8. Accept or change the transmission interval (default: 60 seconds), then
press to return the cursor to the
9. Press (for Save
Stacking menu.
Your Commander switch should now be ready to automatically or manually
acquire Member switches from the list of discovered Candidates, depending
on your configuration choices.
Commander
set to .
Yes
Actions
) to save your configuration changes and return to the
(for ). Then
Edit
option.
Auto Grab setting, then press
set to
Auto Join
line.
Yes