Chapter 7—Commands
UG – Graphics Information Inquiry
Description
Th is command will cause the printer to send information about
graphics currently stored in the printer back to the host.
Syntax
UG
Remarks
Th e printer will send the number of graphics and the name of
each graphic to the host through the RS-232 or USB port.
Th e UG command will be executed directly, without appending
any Linefeed.
Example
UG
UG001
LOGO
106
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
:Returns number of graphics and
all graphic names, for example: