Intermec ESim v4.20 Programmer's Reference Manual page 2

Intermec Printer AB
P.O. Box 123
S-431 22 Mölndal
Sweden
Service support: +46 31 869500
Th e information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and/or service Intermec
manufactured equipment and is not to be released, reproduced, or used
for any other purpose without written permission of Intermec.
Information and specifi cations in this manual are subject to change with-
out notice.
© 2005 by Intermec Printer AB
All Rights Reserved
EasyCoder, EasyLAN, Fingerprint, and LabelShop are registered trade-
marks of Intermec Technologies Corp. Th e word Intermec, the Intermec
logo, InterDriver, PrintSet, and Duratherm are trademarks of Intermec
Technologies Corp.
Th e name Centronics is wholly owned by GENICOM Corporation.
Kimdura is a registered trademark of Kimberly Clark.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark of Microsoft Corporation.
Th roughout this manual, trademarked names may be used. Rather than
put a trademark (™) symbol in every occurrence of a trademarked name,
we state that we are using the names only in an editorial fashion, and to
the benefi t of the trademark owner, with no intention of infringement.