Pa Print Automatic - Intermec ESim v4.20 Programmer's Reference Manual

PA – Print Automatic
Description Th is command is used in a stored form sequence to automatically
print the form as soon as all variable data has been supplied.
Syntax
PAp
Parameters p
1
p
2
Remarks Refer to the P command for explanations on how to print mul-
tiple labels with counters. Th e PA command follows the same
principles.
Th e PA command can only be used with forms containing at
least one variable (see V command). If there is no variable in
the form, the printer will enter a loop and print continuously!
Examples
FK"TEST6"↵
FS"TEST6"↵
V00,50,N,"Enter text"↵
A24,24,0,4,1,1,N,V00↵
PA1↵
FE↵
FR"TEST6"↵
?↵
This is variable text
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
[,p ]
1 2
Numbers of label sets (1-65535).
Number of copies of each label (1-65535). Used in combination with counters
to print multiple copies of the same label.
Chapter 7—Commands
:Deletes form "TEST6"
:Starts form store sequence
:Defines variable
:Writes text with variable
:Prints 1 label automatically
:Ends form store sequence
:Retrieves form "TEST6"
:Gets variables
:Data for variable 00
93