Before You Begin; Warranty Information; Safety Summary - Intermec EasyCoder 4630 User Manual

Coax/twinax interface card
Hide thumbs Also See for EasyCoder 4630:
Table of Contents

Advertisement

Before You Begin

Before You Begin
This section introduces you to standard warranty provisions, safety
precautions, and sources of additional product information.

Warranty Information

To receive a copy of the standard warranty provision for this product,
contact your local Intermec support services organization. In the U.S.
call 1-800-755-5505, and in Canada call 1-800-688-7043. Otherwise,
contact your local Intermec sales organization.

Safety Summary

Your safety is extremely important. Read and follow all warnings and
cautions in this book before handling and operating Intermec
equipment.
Do not repair or adjust alone Do not repair or adjust energized
equipment alone under any circumstances. Someone capable of
providing first aid must always be present for your safety.
First aid Always obtain first aid or medical attention immediately
after an injury. Never neglect an injury, no matter how slight it seems.
Resuscitation Begin resuscitation immediately if someone is injured
and stops breathing. Any delay could result in death. To work on or
near high voltage, you should be familiar with approved industrial
first aid methods.
Energized equipment Never work on energized equipment unless
authorized by a responsible authority. Energized electrical equipment
is dangerous. Electrical shock from energized equipment can cause
death. If you must perform authorized emergency work on energized
equipment, be sure that you comply strictly with approved safety
regulations.
vii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easycoder 4830

Table of Contents