Uf Form Information Inquiry - Intermec ESim v4.20 Programmer's Reference Manual

UF – Form Information Inquiry
Description Th is command will cause the printer to send information about
forms currently stored in the printer back to the host.
Syntax
UF
Remarks Th e printer will send the number of forms stored and the name
of each form to the host through the RS-232 or USB port.
Th e UF command will be executed directly, without appending
any Linefeed.
Example
UF
UF006
TEST1
TEST2
TEST3
TEST4
TEST5
TEST6
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
:Returns number of forms and all form names,
Chapter 7—Commands
for example:
105