Field Positioning - Intermec ESim v4.20 Programmer's Reference Manual

Chapter 1—General Information

Field Positioning

Th e printable area of the label forms a grid, where the X-axis runs across
the media and the Y-axis runs along the media path. Dots are used as the
unit for establishing position of the upper left corner of each fi eld in rela-
tion to a specifi ed reference point.
Th e printer is available with two diff erent printhead densities (the 203.2
dpi printer and the 300 dpi printer have diff erent fi rmware versions):
Density
X-axis
Y-axis
Number of active dots:
Max. print width:
Dot line to tear bar:
Dot line to cutter blade:
Text and bar code fi elds can be rotated around their insertion points,
whereas lines, boxes and graphics cannot be rotated. However, the entire
print image can be rotated 180°. Th e illustration below shows coordinates
for the default print direction (ZT).
6 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Medium
203.2 dpi (8 dots/mm)
203.2 dpi (8 dots/mm)
832
104 mm
136 dots
256 dots
High
300 dpi (11.81 dots/mm)
304.8 dpi (12 dots/mm)
1208
102.2 mm
204 dots
384 dots