Ui - Enable Prompts/Code Page Inquiry - Intermec ESim v4.20 Programmer's Reference Manual

UI – Enable Prompts/Code Page Inquiry
Description Th is command will cause the printer to enable prompts to be
sent to the host and to send the currently selected code page to
the host through the RS-232 or USB port.
Syntax
UI
Th e printer will send information on the currently selected code
page back to the host in the following format:
UIp
Parameters p
1
p
2
p
3
Remarks Th e KDU (Keyboard Display Unit) automatically sends this
command each time power is applied. Th e UI command is dis-
abled by removing power from the printer for 60 seconds.
Example
UI↵
UI80,001
Also see I and U commands.
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
p ,p
1 2 3
Number of data bits.
Code page.
Country code.
Chapter 7—Commands
:Enables prompts from host and
returns current code page, for example
107