N Clear Image Buff Er - Intermec ESim v4.20 Programmer's Reference Manual

Chapter 7—Commands
N – Clear Image Buff er
Description Th is command is used to clear the image buff er before building
a new image. It also clears any error list that not yet has been
presented.
Syntax
N
Remarks Th e N command is essential when printing labels in the Direct
Mode. It is not necessary to use an N command before printing
a form. An N command must not be used inside a form in the
Form Edit Mode.
Example
N↵
88 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
:Clears image buffer