Two-Dimensional Bar Codes, General Part - Intermec ESim v4.20 Programmer's Reference Manual

b – Two-Dimensional Bar Codes, General Part
Description Th is command is used to print complex bar codes; Data Matrix,
PDF417, MaxiCode, and QR Code. Th e command consists of
two parts; a leading set of general positioning and bar type select
parameters, and a trailing code-specifi c part defi ning the bar
code's appearance and its input data.
Th e general part of the syntax is indicated by italic characters in
the code-specifi c syntax descriptions on the following pages.
Syntax
bp
1
Parameters p
1
p
2
p
3
[code specifi c options], see the following two pages.
Remarks Th e standard program packages contains all the two-dimensional
bar codes mentioned above.
If the amount of data will not fi t in the area specifi ed, the indica-
tor will light orange, indicating an error.
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
,p ,p , [code specifi c options]
2 3
Horizontal start position (X) in dots.
Vertical start position (Y) in dots.
Code type:
D Selects Data Matrix.
M Selects MaxiCode.
P Selects PDF417.
Q Selects QR Code.
Chapter 7—Commands
41