Download Variables - Intermec ESim v4.20 Programmer's Reference Manual

? – Download Variables
Description Th is command is used to signal to the printer that the data fol-
lowing are variable or counter values.
Syntax
?
Remarks Th is command is used by the host system to send data represent-
ing variables and/or counters to the printer after a stored for con-
taining variables and/or counters has been retrieved. Th e amount
of data following the question mark line must match exactly
the total number and order of variables and/or counters for that
specifi c form.
Note: If the ? command is omitted, no variables or counter values
will be printed.
Example
FR"TEST7"↵
?↵
12345↵
abcde↵
ABCDE↵
99999↵
P1↵
Note: Variable data do not use the rules for string invocation into
fi xed text and barcode data.
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Chapter 7—Commands
:Retrieves the form "TEST7"
:Variables follow
:Variable 00 entered
:Variable 01 entered
:Variable 02 entered
:Variable 03 entered
:Prints one label
119