C Cut Immediate - Intermec ESim v4.20 Programmer's Reference Manual

C – Cut Immediate
Description Th is command is used to make the cutter perform a cutting cycle
without printing a form.
Syntax
C
Remarks Th e command C is used for two purposes. C appended by
parameters is used to defi ne counters in the Form Edit mode,
whereas C without any appending parameters is used to initiate a
cutting operation.
C (Cut Immediate) can not be used inside a form or in connec-
tion with a keyboard/display unit (KDU).
To perform self-cleaning of the cutter blade, issue fi ve consecu-
tive C commands without any media loaded.
Example
C↵
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Chapter 7—Commands
:Performs a cutting cycle
53