^C - Continue Printing - Intermec ESim v4.20 Programmer's Reference Manual

^C – Continue Printing
Description Th is high-priority command makes the printer continue print-
ing the remainder of a print job after having been temporarily
stopped using a ^A command.
^C ↵
Syntax
Remarks When the printer is in Pause mode, the control LED slowly
blinks green-yellow-green. Th e reply at command US is by
default <XON> (can be changed using eR command). No reply
at UN command.
Another way to resume printing a batch is to press the Feed key.
Th is command can only be sent via the RS-232 or USB ports.
Example Th is example renders a box and orders the printer to print 4
copies. At command ^A, the printing is paused and continued
again at command ^C.
X0,0,10,20,40↵
P4↵
^A↵
^C↵
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Chapter 7—Commands
123