Intermec ESim v4.20 Programmer's Reference Manual page 61

Recommended density settings are identifi ed in the following tables. Fur-
ther adjustments might be necessary depending on print speed, bar code
density, orientation, and ambient temperature/humidity conditions.
Direct Thermal Printing
Label/Tag Type
Duratherm II
Duratherm II Tag
Duratherm Lightning
Duratherm IR
Th ermal Top
Th ermal Eco
Th ermal Top Board
Th ermal Eco Board
Th ermal IR
Th ermal Top High Speed
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Chapter 7—Commands
Rec. Density Max. Speed
at Speed S = 2
D10 S3
D9 S1
D9 S3
D7 S3
D8 S3
D8 S3
D11 S2
D7 S2
D12 S3
D6 S3
55