Error Types - Intermec ESim v4.20 Programmer's Reference Manual

Appendix A — Error-Handling

Error Types

Classifi ed types of error & status codes for the Error Replies table later in
this appendix.
Type Feature
A Minor Error
of command
sequences and
similar.
B Print Stop-
ping Error.
C Paper End
Stopping
Error.
D Error of
printing func-
tionality and
status.
E Status
changes.
F Unrecoverable
Error.
G Dump mode.
H Pause mode.
150 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Generates
At Error reporting (cmd
US): Sets error on print
command and sets Orange
LED or Red LED.
At no Error reporting (cmd
UN): Green LED, at print
command
Sets Orange LED or red
LED.
Sets red LED, at print.
Sets red LED direct, some-
times blinking.
No LED change.
Sets red LED direct.
Green LED in dump mode.
LED blinking green/orange
Recovered by
At Error reporting (cmd US):
FEED key or command Reset
^@. See Also command USA.
At no Error reporting (cmd
UN): No recover necessary,
already done.
Feed Key or command Reset
^@.See also command USB.
Load new media and press
FEED key or command Reset
^@.
Manual or automatic (tem-
perature lowered) measure or
command Reset ^@.
No recover necessary/Delete
Label from LTS. See also com-
mand USE.
Power Off /Power On or com-
mand Reset ^@.
Feed Key or command Reset
^@.
Feed key or command ^B or
^C.