Z Print Direction - Intermec ESim v4.20 Programmer's Reference Manual

Chapter 7—Commands
Z – Print Direction
Description Th is command is used to select the print orientation.
Syntax
Zp
1
Parameters p
1
Remarks Th is command aff ects the complete print image, including text,
bar codes, graphics, lines, and boxes, as well as the location of the
reference point (see R command).
Note that printing a test label in the Test Mode, or by means of
a U or UP command, will reset the print direction to default (=
ZT).
ZT Command:
ZB Command:
Example
ZB↵
118 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Print orientation:
T Start printing from the top of image buff er (default).
B Start printing from the bottom of image buff er.
Feed Direction
EASYCODER C4
Feed Direction
:Starts printing from the bottom of the image buffer.
C4 EASYCODER