Maxicode - Intermec ESim v4.20 Programmer's Reference Manual

Chapter 7—Commands
b – MaxiCode
Description Th e following MaxiCode specifi c options should append the
general part of the two-dimensional code command (indicated by
italic characters, see b command, general part). Only mode 2 and
3 are supported.
Syntax
bp
1
Parameters CL
CO
PC
LPM
Example
N↵
b100,100,M,"300,400,93065,1692,This is→
→MaxiCode"↵
P1↵
42 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
,p ,p , ["CL,CO,PC,LPM"]
2 3
Class Code (3 digit number).
Country Code (3 digit number).
Postal Code (type of input decides mode 2 or 3):
Mode 2: U.S.A. (5 digits, 4 digits). Note the separating comma sign!
Mode 3: International (6 alphanumeric characters).
Low Priority Message (up to 84 alphanumeric characters).