P Print - Intermec ESim v4.20 Programmer's Reference Manual

Chapter 7—Commands
P – Print
Description Th is command is used to print the contents of the image buff er.
Syntax
Pp
1
Parameters p
1
p
2
Remarks Important!
Th e P command cannot be used inside a stored form sequence.
For automatic printing of stored forms, use the PA command.
Examples
P↵
P1↵
P2,1↵
P5,2↵
Th e principles for how counters are printed is illustrated by this
example, where the print command is P2,2:
Counter: 1
Counter: 1
Counter: 2
Counter: 2
92 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
[,p ]
2
Numbers of label sets (1-65535).
Number of copies of each label (1-65535). Used in combination with counters
to print multiple copies of the same label.
:Prints two label sets of one label each
:Prints five label sets of two labels each
Label No. 1
Label No. 2
Label No. 3
Label No. 4
:Prints one label set
:Prints one label set