S Speed Select - Intermec ESim v4.20 Programmer's Reference Manual

Chapter 7—Commands
S – Speed Select
Description Th is command is used to select the print speed.
Syntax
Sp
1
Parameters p
1
Remarks Changing the print speed will aff ect the blackness of the print-
out, which may have to be adjusted using a D command.
Example
S2↵
100 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Speed select value:
0 30 mm/sec. (1.2 inches/sec.)
1 40 mm/sec. (1.6 inches/sec.)
2 50 mm/sec. (2 inches/sec.)
3 75 mm/sec. (3 inches/sec.) 203.2 dpi (8 dots/mm) printers only.
:Sets the print speed to 50 mm/sec. (2 inches/sec.).