W Windows Mode - Intermec ESim v4.20 Programmer's Reference Manual

W – Windows Mode
Description Th is command is used to enable/disable the Windows command
mode (special applications only).
Syntax
Wp
1
Parameters p
1
Remarks When enabled, the printer will accept Windows mode escape
sequences to print data. When disabled, escape sequences will be
ignored up to the next linefeed.
Th e Windows mode escape sequences are only used by the Win-
dows Printer Driver. When working with a main frame or other
non-Windows host, this mode can be disabled to prevent erratic
operation.
Examples
WY↵
WN↵
Intermec EasyCoder ESim v4.20—Programmer's Reference Manual
Windows Mode enable/disable:
Y Enables Windows Mode.
N Disables Windows Mode (default).
Chapter 7—Commands
:Enables Windows Mode
:Disables Windows Mode
115