Direct Mode - Intermec ESim v4.20 Programmer's Reference Manual

Chapter 2—Commands List

Direct Mode

Setup Commands
Used to set up the printer globally, that is, aff ect both the Direct Mode
and Forms.
D Density
eR User-Defi ned Error/Status Character Control
f Cut Position
I Character Set Selection
i Asian Character Spacing
JB Disable Top of Form Backup
JF Enable Top of Form Backup
j Media Feed Adjustment
M Memory Allocation
O Options Select
oR Character Substitution
Q Set Form Length
q Set Label Width
R Set Reference Point
S Speed Select
UC Command Reply Accept Character Control
UN Disable Error Reporting
US Enable Error Reporting
W Windows Mode
Y Serial Port Setup
Z Print Direction
Store Commands
Used to store graphic fi les.
GM Store Graphics in Memory
GW Store Graphics in Image Buff er
Used to store soft fonts.
ES Store Soft Font
Clear and Delete Commands
Used to erase data from the printer's memory.
EK Delete Soft Font
FK Delete Form
GK Delete Graphics
N Clear Image Buff er
^@ Reset Printer
10 Intermec EasyCoder ESim v4.20—Programmer's Reference Manual