Scan Type; D Scan Resume Timer - Icom IC-M200 Instruction Manual

6
BASIC OPERATION
■ Set mode items
Push [▲] or [▼] to change the setting
D Scan type
Select whether to start the Normal scan or Priority
scan after pushing [SCAN]. (p. 10)
Normal scan (default)

D Scan resume timer

When the function is ON, the scan pauses for
5 seconds and resumes even if a signal has been
received on any channel other than Channel 16.
(p. 10)
Scan timer OFF (default)
13
Priority scan
Scan timer ON
D Dual/Tri-watch
Select whether to start Dualwatch or Tri-watch after
pushing [DW]. (p. 11)
Dualwatch (default)
D Key Beep
Turn the key beep ON or OFF.
Beep ON (default)
D FAV on MIC
When the function is ON, [▲] or [▼] on the
microphone select only the TAG channels in the
selected channel group in sequence.
L " " scrolls in the lower right corner.
FAV on MIC ON (default)
Tri-watch
Beep OFF
FAV on MIC OFF