Set Mode Items; D Beep Tone Function "Bp; D Weather Alert Function "Al; D Priority Scan Function "Pr - Icom ic-m88 Instruction Manua

8
SET MODE

■ Set mode items

D Beep Tone function "bP"

You can select silent operation by turning OFF the beep
tones, or you can have 2 types of confirmation beeps sound
at the push of a key. When ON is selected, a fixed beep (Pi)
sounds and when US is selected, the preset beeps (example:
do, re, mi) sound.
Beep tone ON (default)

D Weather Alert function "AL"

A NOAA broadcast station transmits a Weather alert tone
before any important Weather announcements. When the
Weather Alert function is turned ON, the transceiver detects
the alert, the bell icon blinks and sounds a beep tone until
you operate the transceiver. The previously selected (used)
Weather channel is checked any time during standby, or while
scanning, when the Power Save function is activated.
• "ALT" appears when the function is set ON.
Weather Alert function
OFF (default)
18
PUSH
User Beep
PUSH
Weather Alert function
ON

D Priority Scan function "Pr"

The transceiver has 2 scan types— Normal and Priority
scans.
A Normal scan searches all Tag channels in the selected
channel group.
Priority scan sequentially searches all Tag channels while
monitoring Channel 16.
PUSH
Normal scan (default)

D Scan Resume timer "St"

You can set the Scan Resume timer as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until a received signal disappears. When ON is selected, the
scan pauses for 5 seconds after receiving a signal and then
resumes, even if a signal has been received.
PUSH
Scan resume timer OFF
(default)
Priority scan
Scan resume timer ON