Scan Resume Timer; Roger Beep; Scan Restart Function - Icom IC-440N Instruction Manual

4
SET MODE
D

Scan resume timer

The Scan Resume mode can be set as a pause (P5) or timer
scan (15/10/5). When signal disappears, scan resumes after
5 seconds regardless of the setting.
15/10/5 : Scan pauses for 15, 10 or 5 seconds when a signal
is detected, then resumes.
P5 : Scan pauses until the signal disappears and then
resumes after 5 seconds (Default and recommend-
ed setting.)
Scan resume timer
P5 (default)
D

Scan restart function

This function starts the scan after the transmission is per-
formed during the scan and after 10 seconds.
Scan restart timer
OFF (default)
24
10 second setting
Scan restart timer ON
D

Roger Beep

This function emits a beep on the communication party to
inform the termination of the transmission.
Roger beep OFF (default) Roger beep ON